黑料网

• Wear eye protection at all times while you are inside the MakerSpace, whether working or not: safety glasses with side shields, goggles, or face shields. 
• Wear clothes that fit properly. Do not wear loose-fitting clothing around moving or rotating machinery. 
• Remove ties, jewelry, gloves, etc. - especially around moving or rotating machinery. 
• Tie back or cover long hair, to keep it away from moving machinery. 
• Wear closed-toe shoes that cover the entire foot, no open-toe shoes or sandals. 
• Wear suitable gloves when handling hot objects, glass, or sharp-edged items. 
• Wear appropriate clothing for the project (i.e., do not wear clothing that exposes your bare arms or legs when welding). 

• Safety is your top priority when using the shop. If you are not sure what you are doing, ask.  
• Know all locations of first aid, fire, and safety equipment.  
• Never use a tool unless you have been trained to use it safely.  
• Never work alone when using power tools. Two people must be present and able to see one another.  
• Sign in before using any equipment.  
• Do not work in the shop if tired, in a hurry, or taking medication that may cause dizziness or drowsiness. Use sound judgement on your ability to stay alert and focused. 
• Do not fool around, startle, or distract anyone (not even with conversation) while either one of you is using a tool.  
• Think through the entire project before starting. Prepare prints or drawings - with all dimensions and specifications - prior to using machines. 

• Use tools as they were designed to be used (i.e., a wrench is not a hammer). 
• Never use a broken tool.  
• Report broken tools or machines immediately. 
• Do not remove tools from the room.  
• Never walk away from a tool that is on.  
• A hard hammer should not be used to strike a hardened tool or any machine part. Use a soft-faced hammer.  
• Operate machines with all required guards and shields in place.

 

 

 

 

• Clean up every time you leave an area, including sweeping the floor.  
• Clean and return all tools to where they belong.  
• Use compressed air sparingly; never aim it at another person or use it to clean off hair or clothes.  
• Shut off and unplug machines when cleaning, repairing, or oiling.  
• Never use a rag near moving machinery. 
• Use a brush, hook, or designated tool to remove chips, shavings, etc. from the work area. Never use your hands.  
• Keep fingers clear of the point of operation of machines by using the special tools or devices, such as, push sticks, hooks, pliers, etc.  
• Keep the floor around machines clean, dry, and free from trip hazards. Do not allow chips to accumulate.  
• Mop up spills immediately and place a chair or cone over them, if they are wet enough to cause a slip or fall.